Really Simple SSL

Description

Really Simple SSL configurera automatiquement votre site web pour qu’il utilise SSL à son plein potentiel. Utilisez des fonctionalités de sécurité supplémentaires pour protéger votre site web, et utilisez notre serveur de contrôle de santé pour rester à jour.

Fonctionnalités

  • Migration SSL facile : passez votre site web en HTTPS en un seul clic.
  • Let’s Encrypt : installez un certificat SSL si votre hébergeur web prend en charge l’installation manuelle.
  • Serveur de contrôle de santé : la configuration de votre serveur est tellement importante pour la sécurité de votre site web.
  • Durcissement de WordPress : ajustez votre configuration et renforcez la sécurité de WordPress en vous attaquant à ses faiblesses.
  • Détection des vulnérabilités : soyez averti lorsque des extensions, des thèmes ou le coeur contiennent des vulnérabilités et qu’il faut prendre les mesures appropriées.

Améliorez la sécurité avec Really Simple SSL Pro

  • L’analyseur et correcteur de contenu mixte. Détectez les fichiers qui sont demandés par HTTP et réparez-les. Sur les interfaces publiques et d’administration.

En-têtes de sécurité

Ces fonctionnalités permettent de réduire les risques de détournement de clics, d’attaques de type « cross-site-forgery », de vol d’identifiants de connexion et de logiciels malveillants, entre autres.

  • Indépendant de la configuration de votre serveur, fonctionne sur Apache, LiteSpeed, NGINX etc.
  • Protégez les visiteurs de votre site web avec X-XSS Protection, X-Content-Type-Options, X-Frame-Options et Referrer Policy.
  • Activez HTTP Strict Transport Security et configurez votre site pour la liste de préchargement du HSTS.

Sécurité avancée

Isolez votre site web des chargements de fichiers inutiles et des échanges avec des tiers. Contrôlez entièrement votre site web et minimisez les risques de manipulation.

  • Conçu pour WordPress.
  • Contrôlez les tiers avec la politique de sécurité du contenu – y compris le mode d’apprentissage.
  • Contrôlez les fonctionnalités du navigateur à l’aide de la Politique de droits, par exemple la géolocalisation, les caméras et les microphones.
  • Isolez l’échange d’informations avec d’autres sites web. Contrôlez entièrement les entrées et les sorties de données.

Durcissement avancé

  • Choisissez une adresse web de connexion personnalisée
  • Renommez et rendez aléatoire le préfixe de votre base de données.
  • Modifiez l’emplacement du fichier debug.log vers un dossier non public.
  • Désactivez les mots de passe d’application.
  • Contrôle de la création d’administrateurs
  • Désactivez les méthodes HTTP, ce qui réduit le nombre de requêtes HTTP.

Mesures de vulnérabilité

Lorsqu’une vulnérabilité est détectée, vous en êtes informé. Avec Mesures de vulnérabilité, vous pouvez configurer des mesures simples, mais efficaces, pour vous assurer qu’une notification manquée n’est pas la fin du monde.

  • Mise à jour forcée : un processus de mise à jour sera tenté plusieurs fois, jusqu’à ce que l’on puisse supposer que le développement d’un thème ou d’une extension est abandonné. Vous serez averti au cours de ces étapes.
  • Quarantaine : elle prolonge le processus de mise à jour, qui s’exécute. Lorsqu’une extension ou un thème ne peut pas être mis à jour pour résoudre une vulnérabilité, il sera désactivé. À utiliser avec précaution !

Comment fonctionne la migration HTTPS de Really Simple SSL ?

  • L’extension vérifiera d’abord s’il existe un certificat SSL. Si vous n’en avez pas, vous pouvez en générer un dans l’extension. En fonction de votre hébergeur web, l’extension peut également l’installer pour vous, ou vous aider avec des instructions.
  • Si nécessaire, il traitera les problèmes connus que WordPress rencontre avec SSL. Par exemple, votre site web utilise un équilibreur de charge, un proxy ou des en-têtes ne sont pas transmis pour détecter un certificat.
  • Toutes les requêtes entrantes sont redirigées vers HTTPS avec une redirection 301 WordPress par défaut. Vous pouvez également choisir une redirection .htaccess.
  • L’adresse web du site et l’adresse web d’accueil sont changés en HTTPS.
  • Votre contenu non sécurisé est corrigé en remplaçant dynamiquement toutes les adresses web HTTP:// par HTTPS://, à l’exception des hyperliens externes.
  • Les témoins définis avec PHP sont définis de manière sécurisée, en leur attribuant le drapeau httpOnly.

Liens utiles

Vous appréciez Really Simple SSL ?

Espérons que cette extension vous permette d’économiser du temps. Si vous souhaitez soutenir le développement continu de cette extension, veuillez envisager d’acheter Really Simple SSL Pro, qui comprend d’excellentes fonctionalités de sécurité et un soutien premium.

À propos de Really Simple Plugins

Les autres extensions développées par Really Simple Plugins sont : Complianz et Burst Statistics. Really Simple SSL est développée par Really Simple Plugins.

Pour générer des certificats SSL, Really Simple SSL utilise la bibliothèque client Let’s Encrypt le acme2 PHP, merci à « fbett » de la fournir. La détection des vulnérabilités utilise WP Vulnerability, une initiative open source de Javier Casares. Vous souhaitez contribuer en tant que collaborateur ? Nous sommes également sur GitHub !

Captures d’écran

  • Votre tableau de bord Really Simple SSL - Pour une configuration optimale.
  • Le bilan de santé du serveur - Un examen approfondi de votre serveur.
  • Nouvelles fonctionnalités de durcissement - Fortifiez votre site web en minimisant les faiblesses.

Installation

Pour installer cette extension :

  1. Faites une sauvegarde ! Voir nos recommandations.
  2. Installez votre certificat SSL ou générez-en un avec Really Simple SSL.
  3. Télécharger l’extension.
  4. Téléversez l’extension dans le répertoire wp-content/plugins.
  5. Vous devrez peut-être vous reconnecter, alors gardez vos infos de connexion à portée de main.
  6. Allez à « Extensions » dans votre administration WordPress, puis cliquez sur « Activer ».
  7. Vous allez maintenant voir une notification vous demandant d’activer SSL. Cliquez dessus et re-connectez-vous, si nécessaire.

FAQ

Base de connaissances

Pour des explications et une documentation plus détaillées sur les boucles de redirection, Let’s Encrypt, le contenu mixte, les erreurs, et autres, veuillez chercher dans la documentation

Détection des vulnérabilités

La détection des vulnérabilités est actuellement en version bêta. Elle est stable, mais a besoin d’être améliorée. Si vous pouvez nous faire part de vos commentaires, n’hésitez pas à le faire !

Problèmes de contenu mixte

La plupart des problèmes de contenu mixte sont causés par des adresses web dans les fichiers CSS ou JS.
Pour obtenir des instructions détaillées sur la façon de chercher le contenu mixte, lisez cet article.

Génération d’un certificat SSL Let’s Encrypt

Nous avons ajouté la possibilité de générer un certificat SSL gratuit avec Let’s Encrypt dans notre assistant Really Simple SSL. Nous avons une liste mise à jour disponible pour toutes les intégrations possibles ici. Veuillez laisser des rétroactions pour une autre intégration, des informations incorrectes ou un besoin d’aide.

Problèmes de boucles de redirection

Si vous rencontrez des boucles de redirection sur votre site, essayez ces instructions.

L’extension est-elle compatible multisite ?

Oui. Il existe une page de réglages réseau dédiée où vous pouvez contrôler les réglages de l’ensemble de votre réseau, en une seule fois.

Désinstallation de Really Simple SSL

L’extension vérifie votre certificat avant de l’activer, mais si, par exemple, vous avez migré le site vers un environnement non-SSL, vous pourriez être bloqué dans l’interface d’administration.

Si vous ne pouvez pas la désactiver, ne vous contentez pas de supprimer le dossier de l’extension pour la désinstaller ! Suivez plutôt ces instructions.

Avis

16 mars 2024
Замечательный плагин. Быстро и легко!
14 mars 2024
After using this plugin for a long time with no problems, I feel safer, and my clients feel safe visiting my website. I recommend Really Simple SSL for all, and it is safe, reliable, and worth the money.
10 mars 2024
Makes the complicated process of setting up SSL as simple as installing a plugin and adjusting the settings. Many thanks for creating this!
Lire les 8 488 avis

Contributeurs & développeurs

« Really Simple SSL » est un logiciel libre. Les personnes suivantes ont contribué à cette extension.

Contributeurs

“Really Simple SSL” a été traduit dans 57 locales. Remerciez l’équipe de traduction pour ses contributions.

Traduisez « Really Simple SSL » dans votre langue.

Le développement vous intéresse ?

Parcourir le code, consulter le SVN dépôt, ou s’inscrire au journal de développement par RSS.

Historique des changements

7.2.3

  • Improvement: give json directory a random foldername, and remove after deactivating vulnerability detection
  • Improvement: link in vulnerability notification to the vulnerability overview page instead of measures
  • Improvement: allow for versions with a ‘v’ prefix in the version number in vulnerability detection
  • Fix: duplicate do_not_edit_htaccess key in the fields array, causing the setting to not be saved
  • Fix: css for last step in Lets Encrypt wizard
  • Fix: js error on subsites on a multisite setup in plugins overview due to deactivation modal

7.2.2

  • January 24th 2024
  • Improvement: new onboarding setup
  • Improvement: improved hide wp-version logic

7.2.1

  • Fix: Config for CSP preventing Learning mode from completing
  • Fix: datatable styling
  • Fix: using deactivate_https with wp-cli did not remove htaccess rules
  • Improvement: add query parameter to enforce email verification &rsssl_force_verification
  • Improvement: css for check certificate manually button

7.2.0

  • Fix: changed link to article
  • Fix: remove flags .js file which was added twice, props @adamainsworth
  • Fix: typo in missing advanced-headers.php notice
  • Improvement: catch php warning when script src is empty when using hide wp version, props @chris-yau
  • Improvement: new save & continue feedback
  • Improvement: datatable styling
  • Improvement: new react based modal
  • Improvement: menu re-structured
  • Improvement: re-check vulnerability status after core update
  • Improvement: link in the email security notification to the vulnerability page instead of to a general explanation

7.1.3

  • October 11th 2023
  • Fix: React ErrorBoundary preventing Let’s Encrypt generation to complete.

7.1.2

  • October 6th 2023
  • Fix: hook change in integrations loader causing modules not to load. props @rami5342

7.1.1

  • October 5th 2023
  • Fix: incorrect function usage, props @heutger

7.1.0

  • October 4th 2023
  • Improvement: detection if advanced-headers.php file is running

7.0.9

  • September 5th 2023
  • Improvement: typo update word
  • Improvement: translatability in several strings.

7.0.8

  • August 8th 2023
  • Improvement: WordPress tested up to 6.3
  • Improvement: improve file existence check json
  • Fix: handling of legacy options in php 8.1
  • Fix: count remaining tasks

7.0.7

  • July 25th 2023
  • Improvement: modal icon placement in wizard on smaller screens
  • Improvement: expire cached detected headers five minutes after saving the settings
  • Fix: handling of legacy options in php 8.1
  • Fix: prevent issues with CloudFlare when submitting support form from within the plugin
  • Fix: translations singular/plural for japanese translations @maboroshin

7.0.6

  • July 4th 2023
  • Improvement: support custom wp-content directory in advanced-headers.php
  • Improvement: prevent usage of subdirectories in custom login url
  • Fix: translations not loading for chunked react components
  • Improvement: add option to manually re-check vulnerabilities ‘&rsssl_check_vulnerabilities’, props @fawp

7.0.5

  • Fix: some users with a non www site reporting issues on the login page over http://www, due to the changes in the wp redirect. Reverting to the old method. props @pedalnorth, @mossifer.

7.0.4

  • June 14th 2023
  • Improvement: notice informing about the new free vulnerability detection feature
  • Improvement: improved the php redirect method
  • Improvement: make the wp-config.php not writable notice dismissable
  • Fix: feedback on hardening features enable action not showing as enabled, props @rtpHarry

7.0.3

  • Fix: fix false positives on some plugins
  • Improvement: vulnerability notifications in site health, if notifications are enabled.

7.0.2

  • Improvement: improve matching precision on plugins with vulnerabilities.

7.0.1

  • Fix: When the Rest API is not available, the ajax fallback should kick in, which didn’t work correctly in 7.0. props @justaniceguy

7.0.0

  • New: Vulnerability Detection is in Beta – Read more or Get Started
  • Improvement: move onboarding rest api to do_action rest_route
  • Improvement: catch several edge situations in SSL Labs api
  • Improvement: SSL Labs block responsiveness
  • Improvement: more robust handling of wp-config.php detection

6.3.0

  • Improvement: added support for the new Let’s Encrypt staging environment

6.2.5

  • Improvement: add warning alert option
  • Fix: capability mismatch in multisite. props @verkkovaraani

6.2.4

  • Improvement: optionally enable notification emails in onboarding wizard
  • Improvement: onboarding styling
  • Fix: catch non array value from notices array, props @kenrichman
  • Fix: typo in documentation link, props @bookman53

6.2.3

  • Improvement: Changed Back-end react to functional components
  • Improvement: multisite notice should link to network admin page
  • Improvement: detect existing CAA records to check Let’s Encrypt compatibility
  • Improvement: tested up to wp 6.2
  • Improvement: UX improvement learning mode

6.2.2

  • Fix: capability mismatch for a non administrator in multisite admin, props @jg-visual

6.2.1

  • Fix: race condition when activating SSL through wp-cli, because of upgrade script
  • Fix: missing disabled state in textarea and checkboxes
  • Fix: some strings not translatable
  • Fix: Let’s Encrypt renewal with add on
  • Improvement: permissions check re-structuring
  • Improvement: notice on subsite within multisite environment about wildcard updated

6.2.0

  • New: optional email notifications on advanced settings
  • Improvement: added tooltips
  • Improvement: added warnings for .htaccess redirect
  • Improvement: don’t send user email change on renaming admin user, as the email doesn’t actually change
  • Improvement: Use BASEPATH only for wp-load.php, so symlinked folders will load based on ABSPATH
  • Improvement: Improved support for environments where Rest API is blocked

6.1.1

  • Fix: WP CLI not completing SSL when because site_has_ssl option is not set if website has not been visited before, props @oolongm
  • Improvement: prevent ‘undefined’ status showing up in api calls on settings page
  • Improvement: show notice if users are using an <2.0 Let’s Encrypt shell add-on which is not compatible with 6.0

6.1.0

  • Improvement: some UX changes
  • Improvement: Limit number of notices in the dashboard
  • Improvement: load rest api request url over https if website is loaded over https
  • Fix: empty menu item visible in Let’s Encrypt menu

6.0.14

  • Fix: settings page when using plain permalinks, props @mvsitecreator, props @doug2son

6.0.13

  • Improvement: improve method of dropping empty menu items in settings dashboard
  • Improvement: dynamic links in auto installer
  • Improvement: Let’s Encrypt Auto installer not working correctly, props @mirkolofio
  • Improvement: change rest_api method to core wp apiFetch()
  • Improvement: scroll highlighted setting into view after clicking « fix » on a task
  • Improvement: run http method test in batches, and set a default, to prevent possibility of curl timeouts on systems with CURL issues
  • Improvement: clean up code-execution.php file after test, props @spinhead
  • Improvement: give notification if ‘DISABLE_FILE_EDITING’ is set to false in the wp-config.php props @joeri1977
  • Improvement: drop some unnecessary translations
  • Improvement: set better default, and change transients to option for more persistent behavior in wp version test, props @photomaldives
  • Fix: Burst Statistics not activating after installation
  • Fix: CSS for blue labels in progress dashboard below 1080px
  • Fix: WPCLI SSL activation not working due to capability checks, props @oolongm
  • Fix: catch invalid account error in Let’s Encrypt generation, props @bugsjr
  • Fix: do not block user enumeration for gutenberg

6.0.12

  • Fix: on multisite, the test for users with admin username did not use the correct prefix, $wpdb->base_prefix, props @jg-visual
  • Improvement: allow submenu in back-end react application
  • Improvement: Skip value update when no change has been made
  • Improvement: no redirect on dismiss of admin notice, props @gangesh, @rtpHarry, @dumel
  • Improvement: remove obsolete warning
  • Improvement: qtranslate support on settings page

6.0.11

  • Fix: on some environments, the HTTP_X_WP_NONCE is not available in the code, changed logged in check to accomodate such environments
  • Fix: dismiss on admin notices not immediately dismissing, requiring dismiss through dashboard, props @dumel

6.0.10

  • Fix: Apache 2.4 support for the block code execution in the uploads directory hardening feature, props @overlake
  • Fix: When used with Varnish cache, Rest API get requests were cached, causing the settings page not to update.
  • Fix: Ensure manage_security capability for users upgraded from versions before introduction of this capability
  • Fix: allow for custom rest api prefixes, props @coderevolution
  • Fix: bug in Let’s Encrypt generation with DNS verification: saving of ‘disable_ocsp’ setting, create_bundle_or_renew action with quotes
  • Fix: change REST API response method to prevent script errors on environments with PHP warnings and errors, causing blank settings page
  • Improvement: Simplify user enumeration test
  • Improvement: catch unexpected response in SSL Labs object
  • Improvement: z-index on on boarding modal on smaller screen sizes, props @rtpHarry
  • Improvement: hide username field if no admin username is present, props @rtpHarry

6.0.9

  • Fix: incorrectly disabled email field in Let’s Encrypt wizard, props @cburgess
  • Improvement: on rename admin user, catch existing username, and strange characters
  • Improvement: catch openBaseDir restriction in cpanel detection function, props @alofnur
  • Improvement: remove 6.0 update notices on subsites in a multisite network, props @wpcoderca, (@collizo4sky

6.0.8

  • Improvement: Lets Encrypt wizard CSS styling
  • Improvement: re-add link to article about Let’s Encrypt so users can easily find the URL
  • Improvement: let user choose a new username when selecting « rename admin user »

6.0.7

  • Fix: restrict conditions in which htaccess rewrite runs, preventing conflicts with other rewriting plugins

6.0.6

  • Fix: drop upgrade of .htaccess file in upgrade script

6.0.5

  • Fix: race condition in .htaccess update script, where multiple updates simultaneously caused issues with the .htaccess file

6.0.4

  • Fix: using the .htaccess redirect in combination with the block code execution in uploads causes an issue in the .htaccess redirect
  • Fix: deactivating Really Simple SSL does not completely remove the wp-config.php fixes, causing errors, props @minalukic812

6.0.3

  • Fix: Rest Optimizer causing other plugins to deactivate when recommended plugins were activated, props @sardelich

6.0.2

  • Fix: do not show WP_DEBUG_DISPLAY notice if WP_DEBUG is false, props @janv01
  • Fix: empty cron schedule, props @gilvansilvabr
  • Improvement: several typo’s and string improvements
  • Fix: auto installer used function not defined yet
  • Fix: rest api optimizer causing an error in some cases @giorgos93

6.0.1

  • Fix translations not loading for scripts

6.0.0

  • Testé jusqu’à WordPress 6.1.0
  • Improvement: User Interface
  • New: Server Health Check – powered by SSLLabs
  • New: WordPress Hardening Features

5.3.0

  • Improvement: added PHP 8.1 compatibility
  • Improvement: updated .htaccess redirect comment
  • Nouveauté : ajout d’une aide à l’installation
  • Improvement: is_writable check in Let’s Encrypt
  • Improvement: Catch not set subject alternative and common names in cert

5.2.3

  • Testée jusqu’à 5.9

5.2.2

  • Improvement: change text about Google Analytics for a more broader application
  • Improvement: prevent duplicate notice
  • Improvement: better feedback on failed SSL detection
  • Improvement: .htaccess redirect detection with preg_match

5.2.1

  • Improvement: changed text on security headers feedback
  • Improvement: some resources were not loaded minified on the back-end
  • Improvement: dropped one line from tips&tricks to ensure it all fits when translated
  • Improvement: improve feedback on the Let’s Encrypt terms & conditions checkbox being required
  • Improvement: improve feedback on chosen hosting company, if SSL is already available, or not available at all.
  • Improvement: updated wp-config needs fixes notice
  • Improvement: RTL css update

5.2.0

  • Improvement: updated tips & tricks with Let’s Encrypt and Cross-Origin resource policy articles
  • Improvement: updated setting slider styling
  • Improvement: updated WP Config not writable notice and article
  • Improvement: recommended headers check now uses cURL for header detection

5.1.3

  • Improvement: auto rename force-deactivate.php back to .txt after running
  • Improvement: auto flush caches of popular caching plugins
  • Improvement: « dismiss all notices » option on multisite network settings menu
  • Improvement: add option to disable OCSP stapling in the Let’s Encrypt certificate generation, instead of doing this automatically only
  • Improvement: added high contrast option to settings for better WCAG compatibility
  • Improvement: link in « install manually » on Let’s Encrypt certificate renewal should point to certificate download instead of hosting installation url.
  • Improvement: recommend headers check now uses cURL for header detection

5.1.2

  • Improvement: remove one recommendation from the activate ssl notice, to keep it clean
  • Improvement: continue instead of stop when no auto installation possible
  • Improvement: add reset option to Let’s Encrypt generation wizard, to allow fully resetting Lets Encrypt
  • Improvement: saved settings feedback

5.1.1

  • Improvement: color of progress bar
  • Improvement: make notice about not protected directories dismissible, in case the Let’s Encrypt certificate generation process is not completed.
  • Improvement: catch not existing fsock open function, props @sitesandsearch
  • Improvement: slide out animation on task dismissal

5.1.0

  • Improvement: clear keys directory only clearing files
  • Improvement: added WP Version and PHP version to system status export
  • Improvement: check for duplicate SSL plugins
  • Improvement: Catch file writing error in Let’s Encrypt setup where the custom_error_handler wasn’t able to catch the error successfully
  • Improvement: new hosting providers added Let’s Encrypt

5.0.10

  • Fix: Let’s Encrypt SSL certificate download only possible through copy option, and not through downloading the file

5.0.9

  • Improvement: make sure plus one notices also get re-counted outside the settings page after cache clears
  • Fix: On Multisite a Let’s Encrypt specific filter was loaded unnecessarily
  • Improvement: also skip challenge directory check in the ACME library, when the user has selected the skip directory check option

5.0.8

  • Improvement: move localhost test before subfolder test as the localhost warning won’t show otherwise on most localhost setups
  • Fix: when using the shell add-on, the action for a failed cpanel installation should be « skip » instead of « stop »
  • Fix: drop obsolete arguments in the cron_renew_installation function, props @chulainna

5.0.7

  • Fix: check for file existence in has_well_known_needle function, props @libertylink
  • Fix: fixed a timeout on SSL settings page on OVH due to failed port check
  • Improvement: allow SSL generation when a valid certificate has been found

5.0.6

  • Correctif : la classe rsssl_server n’est pas chargée sur cron

5.0.5

  • Correctif : la tâche cron pour la génération de Let’s Encrypt ne charge pas les classes correctes

5.0.4

  • Correctif : notifications de php en mode de génération de certificat SSL, en raison de l’utilisation d’une classe incorrecte
  • Amélioration : option de rafraîchissement dans le cas où le certificat vient d’être installé.
  • Amélioration : identification de la commande invalide pendant la génération du certificat SSL

5.0.3

  • Amélioration : notification d’installation de SSL ignorable, ce qui engendre des situations où SSL est déjà installé et non détecté.
  • Correctif : détection du chemin de base de WordPress dans la fonction de désactivation forcée et dans l’état du système
  • Correctif : les notifications urgentes non recevables étaient toujours ignorées
  • Amélioration : vérification de la compatibilité des modules complémentaires
  • Amélioration : en raison d’un bogue dans Plesk, une erreur « no Order for ID » pouvait être renvoyée. Une deuxième tentative sera désormais automatiquement effectuée lors de la génération du certificat SSL Let’s Encrypt.
  • Amélioration : autorisation de remplacer la détection de SSL par une détection de SSL non valide

5.0.2

  • Amélioration : suppression de certains fichiers pour éviter les avertissements faux positifs de windows defender
  • Amélioration : déplacement de la variable dans l’intégration cPanel pour éviter les avertissements php.

5.0.1

  • Correctif : variable obsolète dans la fonction provoquant des erreurs php sur certaines configurations.

5.0.0

  • Nouveauté : génération de certificats SSL Let’s Encrypt

4.0.15

  • Correctif : les éléments de formulaire structurés non hiérarchiques dans le modèle pouvaient empêcher l’enregistrement des réglages dans certaines configurations.

4.0.14

  • Amélioration : lorsque WordPress signale à tort que SSL n’est pas possible, correction de la notification de santé du site qui en résulte.
  • Amélioration : non affichage de la notification de cookies sécurisés sur les sous-sites d’une installation multisite. Affichage à la place sur le tableau de bord du réseau.

4.0.13

  • Correction de la notification concernant le fait que wp-config.php n’est pas inscriptible même lorsque les réglages du cookie httpOnly sont déjà écrits.

4.0.12

  • Ajout de cookies sécurisés
  • Amélioration de la prise en charge du texte de droite à gauche

4.0.11

  • Correction d’un bogue où les utilisateurs d’une ancienne version Pro pouvaient obtenir une erreur fatale à l’appel d’une fonction privée

4.0.10

  • Amélioration : activation de la redirection WordPess, désactivation de la redirection .htaccess pour les utilisateurs du moteur WP
  • Amélioration : ajustement pour prise en charge .htaccess supprimée dans le moteur WP

4.0.9

  • Amélioration : quelques petites améliorations du CSS dans le tableau de bord
  • Correctif : bascule du crochet switchted wp_insert_site vers wp_initialize_site props @masumm17
  • Correctif : multisite : après être passé de l’échelle du réseau à chaque site, ou inversement, la notification terminée n’a pas disparu.

4.0.8

  • Correctif : correction d’un bogue dans la fonction get_certinfo() où une URL avec un double préfixe pouvait être cochée
  • Amélioration : compatibilité Content Security Policy

4.0.7

  • Amélioration : capture d’info de certificat non définie en cas de tableau vide lorsqu’aucun certificat n’est disponible
  • Amélioration : corrections CSS mineures

4.0.6

  • Amélioration : amélioration du css responsive pour le menu à onglets
  • Amélioration : compatibilité PHP 8
  • Amélioration : ajout de liens vers un article d’aide pour les notifications non inscriptibles
  • Amélioration : notification lorsque le dossier d’extension a été renommé
  • Amélioration : augmentation de la version php minimale nécessaire à 5.6

4.0.5

  • Rétrocompatibilité pour les versions premium < 4.0

4.0.4

  • Ajout du logo Really Simple Plugins
  • Correctif : activation du lien de la tâche pour le multisite redirigé vers le sous-site
  • Correctif : exclusion du compte one plus des notifications administratives

4.0.3

  • Correctif : ignorer sitehealth ne fonctionne pas correctement, props @doffine

4.0.2

  • Correctif : chaîne non traduisible, props @kebbet
  • Amélioration : vidage du cache des notifications d’administration lorsque le SSL est activé ou rechargé via https
  • Correctif : retrait de javascript regex non supporté par Safari, qui fait qu’ignorer ne fonctionne pas sur le bloc de progression
  • Amélioration : possibilité d’ignorer les notifications de santé du site dans les réglages

4.0.1

  • Correctif : correction d’un bogue où le basculement entre la redirection WP/.htaccess entraînait un changement de pourcentage
  • Aucune notification détectée par SSL n’est mise en cache après l’activation de SSL. props @memery2020
  • Correctif : une désactivation avant l’activation du SSL sur un site qui était déjà SSL revenait à http

4.0.0

  • Nouvelle interface utilisateur
  • Correctif : transient stocké avec « WEEK_IN_SECONDS » comme chaîne de caractères au lieu d’une constante
  • Amélioration : tableau de bord des notifications, avec notifications ignorables
  • Amélioration : amélioration de la dénomination des réglages et des instructions
  • Amélioration : articles dans une section trucs & astuces

3.3.4

  • Correctif : préfixage de l’ignorance de la notification d’avis pour éviter les conflits avec d’autres extensions

3.3.3

  • Dismiss review notice now uses get variable to dismiss it

3.3.2

  • Added a notice when using Divi theme with a link to knowledge base instructions
  • Fixed a CSS issue where the active tab in setting didn’t have an active color
  • Added an additional option to dismiss the review notice
  • Removed review notice capability check
  • Fixed a bug on multisite where a plusone was shown when it should only shown on non-multisite
  • Added prefix to uses_elementor() function and added checks if function_exists

3.3.1

  • Fixed a typo in the backup link
  • Added instructions on how to add a free SSL certificate

3.3

  • Updated SSL activated notice
  • Updated readme

3.2.9

  • Fixed a bug where the redirect to settings page would abort SSL activation, not writing the wp-config fix on new installs
  • Fixed typo in force-deactivate notice

3.2.8

  • Added redirect to settings page after activating SSL
  • Improved dashboard SSL certificate check by using the is_valid check from rsssl_certificate instead of relying on site_has_ssl
  • Updated activation notice
  • Updated settings page sidebar styling and links

3.2.7

  • Updated switch_to_blog function in to a backwards compatible version for older WP installations
  • Updated review notice
  • Improved .htaccess not writeable notice for Bitnami installations to show htaccess.conf location
  • Updated green lock to secure lock text
  • Removed border for dashboard sidebar button
  • Activate some security headers by default when pro is enabled

3.2.6

  • Optimized plusone count function
  • Disabled Javascript redirect by default
  • Fixed a bug in the setting highlight function where an undefined setting name could cause a warning

3.2.5

  • Fixed typo in trace_log() function call

3.2.4

  • Improved and added dashboard notices
  • Improved debug logging
  • Added option to dismiss all Really Simple SSL notices
  • Fixed a bug where other plugins buttons had their style reset

3.2.3

  • Added right-to-left text support
  • Show a plusone behind the notice that generated it
  • Added a dismiss text link to dismissible notices
  • Added highlighting to .htaccess redirect option after clicking on dashboard link
  • Added option to dismiss all notices
  • Added site health notice

3.2.2

  • Fix: some single sites setup were having issues with multisite files being included.

3.2.1

  • Fix: error in regex, cause a fatal error in cases where a plus one already was showing in the settings menu

3.2

  • Compteur de mise à jour ajouté à l’élément du menu Réglages/SSL si les réglages recommandés ne sont pas encore activés.
  • Ajout du support de WP-CLI
  • Tweak: made some dashboard items dismissible
  • Tweak: added link on multisite networkwide activation notice to switch function hook to fix conversions hanging on 0%
  • Tweak: required WordPress version now 4.6 because of get_networks() version

3.1.5

  • Correctif : correction de bogue lorsque la définition d’un open_basedir affichait des avertissements PHP en cas d’utilisation de htaccess.conf

3.1.4

  • Tweak: added support for Bitnami/AWS htaccess.conf file
  • Tweak: multisite blog count now only counts public sites
  • Tweak: changed rewrite rules flush time to 1-5 minutes
  • Tweak: improved multisite site count

3.1.3

  • Tweak: no longer shows notices on Gutenberg edit screens
  • Ajustement: Statistiques Google mis à jour avec lien à la page de réglages SSL
  • Fix: multisite blog count now only counts public sites

3.1.2

  • Tweak: added cool checkboxes
  • Ajustement : .well-known/acme-challenge/ est exclus de .htaccess https:// redirect
  • Tweak: implemented transients for functions that use curl/wp_remote_get()
  • Ajustement: Amélioration des notifications de la détection du correcteur de contenus mixtes
  • Tweak: removed review notice for multisite

3.1.1

  • Fix: Multisite network wide activation/deactivation cron not saving settings because user capability not set this early in the process.

3.1

  • Correctif: correction d’un bogue dans la détection du certificat
  • Tweak: added HTTP_X_PROTO as supported header
  • Tweak: split HTTP_X_FORWARDED_SSL into a variation which can be either ‘1’ or ‘on’
  • Ajustement: Détection de certificat amélioré en sous-fichiers en supprimant les domaines des sous-fichiers.
  • Tweak: Multisite bulk SSL activation now chunked in 200 site blocks, to prevent time out issues on large multisite networks.
  • Tweak: a ‘leave review’ notice for new free users

3.0.5

  • Fix: untranslatable string made translatable.

3.0.4

  • Fix: removed anonymous function to maintain PHP 5.2 compatibility.

3.0.3

  • Ajustement: Correcteur de contenus mixtes ne démarrera plus sur du contenu XML
  • Ajustement: Le menu du réseau sur les sous-sites est maintenant toujours visible pour les Super Administrateurs.
  • Tweak: flush rewrite rules upon activation is delayed by one minute to reduce server load

3.0.2

  • Fix: fixed an image containing uppercase characters, which can lead to the image not showing on some servers.
  • Fix: fixed an issue where the ‘data-rsssl=1’ marker wasn’t inserted when the tag was empty.

3.0.1

  • Tweak: Add privacy notice
  • Tweak: Set javascript redirect to false by default
  • Fix: Hide SSL notice on multisite for all subsites, and show only for « activate_plugins » cap users

3.0

  • Added a built-in certificate check in the class-certificate.php file that checks if the domain is present in the common names and/or the alternative names section.
  • The .htaccess redirect now uses $1 instead of {REQUEST_URI}.
  • Ajout d’une option pour désactiver l’extension tout en conservant SSL dans les réglages SSL.
  • Ajout d’un filtre pour la redirection Javascript.
  • Ajout d’une colonne latérale avec des extensions recommandées.

2.5.26

  • Fix: multisite menu not showing when main site is not SSL.
  • Fix: the admin_url and site_url filter get an empty blog_id when checking the URL for the current blog.
  • Tweak: added comment to encourage backing up to activation notice.
  • Tested the plugin with Gutenberg.

2.5.25

  • Fix: « switch mixed content fixer hook » option not visible on the multisites settings page
  • Tweak: several typo’s and uppercasing

2.5.24

  • Fix: On multisite, admin_url forced current blog URL’s over http even when the current blog was loaded over https. This will now only force http for other blog_urls than the current one, when they are on http and not https.

2.5.23

  • Tested up to WP 4.9
  • Added secure cookie notice

2.5.22

  • Changed mixed content fixer hook back from wp_print_footer_scripts to shutdown

2.5.21

  • Fixed double slash in paths to files
  • Fixed typo in activation notice.
  • Tweak: added option to not flush the rewrite rules
  • Fix: prevent forcing admin_url to http when FORCE_SSL_ADMIN is defined

2.5.20

  • Tweak: constant RSSSL_DISMISS_ACTIVATE_SSL_NOTICE to allow users to hide notices.
  • Tweak: setting to switch the mixed content fixer hook from template_redirect to init.
  • Fix: nag in multisite didn’t dismiss properly

2.5.19

  • Multisite fix: due to a merge admin_url and site_url filters were dropped, re-added them
  • Added constant RSSSL_CONTENT_FIXER_ON_INIT so users can keep on using the init hook for the mixed content fixer.

2.5.18

  • Tweak: Removed JetPack fix, as it is now incorporated in JetPack.
  • Tweak: Moved mixed content fixer hook to template_redirect
  • Fix: Changed flush rewrite rules hook from admin_init to shutdown, on activation of SSL.
  • Multisite fix: Changed function which checks if admin_url and site_url should return http or https to check for https in home_url.
  • Tweak: Explicitly excluded json and xmlrpc requests from the mixed content fixer

2.5.17

  • Tweak: Added a function where the home_url and site_url on multisite check if it should be http or https when SSL is enabled on a per site basis.
  • Tweak: Added a notice that there will be no network menu when Really Simple SSL is activated per site.
  • Tweak: Added hook for new multisite site so a new site will be activated as SSL when network wide is activated.
  • Tweak: limited the JetPack listen on port 80 tweak to reverse proxy servers.
  • Tweak: created a dedicated rest api redirect constant in case users want to prevent the rest api from redirecting to https.
  • Fix: dismissal of SSL activated notice on multisite did not work properly

2.5.16

  • Reverted wp_safe_redirect to wp_redirect, as wp_safe_redirect causes a redirect to wp-login.php even when the primary url is domain.com and request url www.domain.com

2.5.15

  • No functional changes, version change because WordPress was not processing the version update

2.5.14

  • Fix: fixed issue in the mixed content fixer where on optimized html the match would match across elements.
  • replaced wp_redirect with wp_safe_redirect
  • Added force SSL on wp_rest_api

2.5.13

  • Tweak: configuration more function

2.5.12

  • Added multisite settings page
  • Added filter for .htaccess code output
  • Increased user capability to « activate_plugins »
  • Added SSL_FORWARDED_PROTO = 1 in addition to SSL_FORWARDED_PROTO = on as supported SSL recognition variable.

2.5.11

  • Removed curl in favor of wp_remote_get

2.5.10

  • Fastest cache compatibility fix

2.5.9

  • Multisite tweaks

2.5.8

  • Removed automatic insertion of .htaccess redirects. The .htaccess redirects work fine for most people, but can cause issues in some edge cases.
  • Added option to explicitly insert .htaccess redirect
  • Added safe mode constant RSSSL_SAFE_MODE to enable activating in a minimized way
  • Fix: RLRSSSL_DO_NOT_EDIT_HTACCESS constant did not override setting correctly when setting was used before.
  • Dropped cache flushing on activation, as this does not always work as expected

2.5.7

  • Tweak: changes testurl to the function test_url()

2.5.6

  • version nr fix

2.5.5

  • Reverted some changes to 2.4.3, as it was causing issues for some users.

2.5.4

fix: Adjusted selection order of .htaccess rules, preventing redirect loops

2.5.3

  • Changed .htaccess redirects to use only one condition

2.5.2

  • removed file_get_contents function from class_url.php, as in some cases this causes issues.

2.5.1

  • Added help tooltips
  • Fix: typos in explanations
  • Added detected server to debug Log
  • Added test folder for CloudFlare
  • Added htaccess redirect to use all available server vars for checking SSL.

2.5.0

  • Tweak: Improved support for cloudflare
  • Tweak: Added support for Cloudfront, thanks to Sharif Alexandre
  • Fix: Prevent writing of empty .htaccess redirect
  • Tweak: Added option for 301 internal wp redirect
  • Tweak: Improved NGINX support
  • Tweak: Added support for when only the $_ENV[HTTPS] variable is present
  • Fix: Mixed content fixing of escaped URLS

2.4.3

  • Bannière supprimée en admin

2.4.2

  • Tweak: Added reload over https link for when SSL was not detected
  • Fixed: After reloading page when the .htaccess message shows, .htaccess is now rewritten.
  • Ajustement : avertissements YOAST supprimés
  • Testé pour WP 4.7
  • Correctif : bogue dans lequel les options réseau n’étaient pas supprimées correctement lors de la désactivation
  • Ajustement : changé le marqueur de contenu mixte à la variation sans guillemets, pour éviter les problèmes avec les scripts, etc.

2.4.1

  • Tweak: improved HSTS check

2.4.0

  • Fixed: added a version check on wp_get_sites / get_sites to get rid of deprecated function notice, and keep backward compatibility.
  • Fixed: A bug in multisite where plugin_url returned a malformed url in case of main site containing a trailing slash, and subsite not. Thanks to @gahapati for reporting this bug.
  • Tweak: Added button to settings page to enable SSL, for cases where another plugin is blocking admin notices.
  • Tweak: Rebuilt the mixed content fixer, for better compatibility
  • Tweak: Improved the mixed content marker on the front-end, so it’s less noticeable, and won’t get removed by minification code.

2.3.14

  • Fixed: Clearing of WP Rocket cache after SSL activation causing an error
  • Fixed: Clearing of W3TC after SSL activation did not function properly

2.3.13

  • Re-inserted Jetpack fix.

2.3.12

  • Requires at least changed back to 4.2, as the function that this was meant for didn’t make it in current release yet.

2.3.11

  • Amélioration de la méthode de demande dans la classe d’URL
  • Added check if .htaccess actually exists in htaccess_contains_redirect_rules()
  • Rendu le message d’activation plus clair.

2.3.10

  • Testée pour 4.6
  • Tweak: changed check for htaccess redirect from checking the RSSSL comments to checking the redirect rule itself
  • Fix: htaccess not writable message not shown anymore when SSL not yet enabled
  • Ajustement : extension du correcteur de contenu mixte pour couvrir les actions dans les formulaires, comme ceux-ci devraient également être http dans le cas d’URL externes
  • Ajustement : ajout d’une liste de domaines sûrs pour les domaines qui sont trouvés mais ne constituent aucune menace
  • Tweak: added filter for get_admin_url in multisite situations, where WP always returns an https url, although the site might not be on SSL
  • Tweak: htaccess files and wpconfig are rewritten when the settings page is loaded

2.3.9

  • Fix: removed internal WordPress redirect as it causes issues for some users.
  • Tweak: improved url request method

2.3.8

  • Ajustement : la redirection de repli a été modifiée en redirection wp interne, ce qui est plus rapide
  • Ajustement : lorsqu’aucune règle .htaccess n’est détectée, l’option de redirection est automatiquement activée
  • Tweak: Url request falls back to file_get_contents when curl does not give a result

2.3.7

  • Captures d’écran mises à jour

2.3.6

  • Fixed: missing priority in template_include hook caused not activating mixed content fixer in some themes

2.3.5

  • Fixed: javascript redirect insertion

2.3.4

  • Tweak: load css stylesheet only on options page and before enabling ssl
  • Tweak: mixed content fixer triggered by is_ssl(), which prevents fixing content on http.
  • Start detection and configuration only for users with « manage_options » capability

2.3.3

  • Correction d’un bogue dans le script de désactivation forcée

2.3.2

  • La détection SSL a été modifiée, de sorte que la page de test n’est uniquement nécessaire que lorsqu’elle n’est pas en SSL.
  • Correction de quelques bugs mineurs.

2.3.1

  • Removed « activate ssl » option when no ssl is detected.
  • Optimized emptying of cache
  • Fixed some bugs in deactivation and activation of multisite

2.3.0

  • Plus de contrôle donné sur le processus d’activation en demandant explicitement d’activer le SSL
  • Ajouté un avertissement si le fichier .htaccess n’est pas inscriptible

2.2.20

Correction d’un bug dans la détection SSL

2.2.19

Changed followlocation in curl to an alternative method, as this gives issues when safemode or open_basedir is enabled.
Added dismissable message when redirects cannot be inserted in the .htaccess

2.2.18

Fixed bug in logging of curl detection

2.2.17

Corrections de sécurité dans ssl-test-page.php

2.2.16

Bugfix with of insecure content fixer.

2.2.13

Added a check if the mixed content fixer is functioning on the front end
Fixed a bug where multisite per_site_activation variable wasn’t stored networkwide
Added clearing of wp_rocket cache thans to Greg for suggesting this
Added filter so you can remove the really simple ssl comment
Fixed a bug in the output buffer usage, which resolves several issues.
Added code so JetPack will run smoothly on SSL as well, thanks to Konstantin for suggesting this

2.2.12

  • To prevent lockouts, it is no longer possible to activate plugin when wp-config.php is not writable. In case of loadbalancers, activating ssl without adding the necessary fix in the wp-config would cause a redirect loop which would lock you out of the admin.
  • Moved redirect above the WordPress rewrite rules in the htaccess file.
  • Added an option to disable the fallback javascript redirection to https.

2.2.11

Brand new content fixer, which fixes all links on in the source of your website.

2.2.10

  • Roll back of mixed content fixer.

2.2.9

Improved the mixed content fixer. Faster and more effective.

2.2.8

Edited the wpconfig define check to prevent warnings when none are needed.

2.2.7

  • Extended detection of homeurl and siteurl constants in wp-config.php with regex to allow for spaces in code.
  • Changed text domain to make this plugin language packs ready
  • Added 404 detection to SSL detection function, so subdomains can get checked properly on subdomain multisite installs

2.2.6

Added slash in redirect rule
small bugfixes

2.2.3

mise à jour de la documentation

2.2.2

  • Ajout d’un support multisite pour le problème de la variable de serveur https manquante
  • Script de connexion curl amélioré
  • Ajout de la traduction française, merci à Cédric

2.2.1

  • Correction de petits bugs

2.2.0

  • Added per site activation for multisite, but excluded this option for subfolder installs.
  • Added script to easily deactivate the plugin when you are locked out of the WordPress admin.
  • Added support for a situation where no server variables are given which can indicate SSL, which can cause WordPress to generate errors and redirect loops.
  • Removed warning on WooCommerce force SSL after checkout, as only unforce SSL seems to be causing problems
  • Added Russian translation, thanks to xsascha
  • Règles de redirection améliorées dans le .htaccess
  • Added option te disable the plugin from editing the .htaccess in the settings
  • Fixed a bug where multisite would not deactivate correctly
  • Fixed a bug where insecure content scan would not scan custom post types

2.1.18

  • Made WooCommerce warning dismissable, as it does not seem to cause issues
  • Fixed a bug caused by WP native plugin_dir_url() returning relative path, resulting in no SSL messages

2.1.17

  • Fixed a bug where example .htaccess rewrite rules weren’t generated correctly
  • Added WooCommerce to the plugin conflicts handler, as some settings conflict with this plugin, and are superfluous when you force your site to SSL anyway.
  • Excluded transients from mixed content scan results

2.1.16

  • Fixed a bug where script would fail because curl function was not installed.
  • Added debug messages
  • Improved FAQ, removed typos
  • Replaced screenshots

2.1.15

  • Improved user interface with tabs
  • Changed function to test SSL test page from file_get_contents to curl, as this improves response time, which might prevent « no SSL messages »
  • Extended the mixed content fixer to replace src= »http:// links, as these should always be https on an SSL site.
  • Added an error message in case of force rewrite titles in Yoast SEO plugin is used, as this prevents the plugin from fixing mixed content

2.1.14

  • Added support for loadbalancer and is_ssl() returning false: in that case a wp-config fix is needed.
  • Improved performance
  • Added debugging option, so a trace log can be viewed
  • Fixed a bug where the rlrsssl_replace_url_args filter was not applied correctly.

2.1.13

  • Fixed an issue where in some configurations the replace url filter did not fire

2.1.12

  • Added the force SSL option, in cases where SSL could not be detected for some reason.
  • Added a test to check if the proposed .htaccess rules will work in the current environment.
  • Readded HSTS to the htaccess rules, but now as an option. Adding this should be done only when you are sure you do not want to revert back to http.

2.1.11

  • Improved instructions regarding uninstalling when locked out of back-end

2.1.10

  • Removed HSTS headers, because it is difficult to roll back.

2.1.9

  • Added the possibility to prevent htaccess from being edited, in case of redirect loop.

2.1.7

  • Refined SSL detection
  • Bugfix on deactivation of plugin

2.1.6

  • Fixed an SSL detection issue which could lead to redirect loop

2.1.4

  • Improved redirect rules for .htaccess

2.1.3

  • Now plugin only changes .htaccess when one of three preprogrammed ssl types was recognized.
  • Simplified filter use to add your own urls to replace, see f.a.q.
  • Default javascript redirect when .htaccess redirect does not succeed

2.1.2

  • Fixed bug where number of options with mixed content was not displayed correctly

2.1.1

  • limited the number of files, posts and options that can be show at once in the mixed content scan.

2.1.0

  • Added version control to the .htaccess rules, so the .htaccess gets updated as well.
  • Added detection of loadbalancer and cdn so .htaccess rules can be adapted accordingly. Fixes some redirect loop issues.
  • Added the possibility to disable the auto replace of insecure links
  • Added a scan to scan the website for insecure links
  • Added detection of in wp-config.php defined siteurl and homeurl, which could prevent from successful url change.
  • Dropped the force ssl option (used when not ssl detected)
  • Thanks to Peter Tak, PTA security for mentioning the owasp security best practice https://www.owasp.org/index.php/HTTP_Strict_Transport_Security in .htaccess,

2.0.7

  • Ajout de la redirection 301 au fichier .htaccess à des fins SEO

2.0.3

  • Fixed some typos in readme
  • added screenshots
  • fixed a bug where on deactivation the https wasn’t removed from siturl and homeurl

2.0.0

  • Added SSL detection by opening a page in the plugin directory over https
  • Added https redirection in .htaccess, when possible
  • Added warnings and messages to improve user experience
  • Added automatic change of siteurl and homeurl to https, to make backend ssl proof.
  • Added caching flush support for WP fastest cache, Zen Cache and W3TC
  • Fixed bug where siteurl was used as url to fix instead of homeurl
  • Fixed issue where url was not replaced on front end, when used url in content is different from home url (e.g. http://www.domain.com as homeurl and http://domain.com in content)
  • Added filter so you can add cdn urls to the replacement script
  • Added googleapis.com/ajax cdn to standard replacement script, as it is often used without https.

1.0.3

  • Améliorations des instructions d’installation